stick thinestones on glass ?

[girlybead]

Hi everyone,
what do I use to stick the rhinestones to the martini glasses. I now understand they have to be washed by hand but What is the best method to use to stick them on glass?

[SnazzyCat]

When we use E6000 with rhinestones, we put a little drop of glue on the end of a pin. Then we touch the glue to the back of the rhinestone. We maneuver the pin-glue-rhinestone over the place where we want the stone to be. Then we push the rhinestone in place, and simultaneously pull the pin away from the stone. We rub the stone and around the stone with our finger or the pin to get any excess glue off. Before it dries, E6000 rubs off like rubber cement.

Please make sure to give it time for the glue to dry, sometimes you will have to wait 4 to 8 hours, my advice ;)

Or you can make your job faster and mess free if you purchase rhinestones that alrady have a glue backs, all you would need is a heat applier to press the stones on any surface. Hope that helps ;)
we do have some Swarovski flat back rhinestones that already have the glue on the back side, take a look see if you like the colors and email us if you have any questions. :) Good luck

Snazzy